This contact adhesive, suitable for application by spray gun or brush, is ideal for bonding upholstery fabrics and car headliners. The adhesive is based on a one-component polychloroprene formulation with solvents.
Packaging Format: 1-liter can
Product Type: One-component contact adhesive based on polychloroprene and solvents
Application: In the automotive industry, cork, and upholstery sectors, this adhesive is recommended for lining applications.
Not suitable for footwear. It is especially effective for assembly bonding of standard leathers, including those with high fat content.
The main characteristics of this adhesive are its strong bond strength and high temperature resistance, making it ideal for processes involving prolonged periods in expansion ovens.
For fabrics other than upholstery, apply a minimal amount of product.
Application Method: Shake the can thoroughly before use. Clean the prepared surfaces to remove dust. Apply the adhesive using a spray gun or brush and allow it to dry according to the open time indicated below. (If the open time has been exceeded, reactivate the adhesive as specified.) Press the bonded surfaces together at approximately 6 kg/cm² for 10–12 seconds.
Storage: This product should be stored in a well-ventilated area, in its original sealed container, protected from moisture and direct sunlight, and at temperatures not lower than 10°C (50°F).
Under these conditions, the product remains effective for up to 6 months.
|
Value |
Unit |
Test method |
| Viscosity (Brookf.RVTD-Spindle 3,20rpm, 20º) |
400-600 |
cPs |
ME006 |
| Solids content |
15-19 |
% |
ME007 |
| Density |
0,8-0,86 |
g/cm3 |
ME009 |
Technical advice:
|
Value |
| Color |
Reddish |
| Drying time |
10-15 minutes |
| Open time (cold bonding) |
10-35 minutes |
| Reactivation (after open time) |
50ºC |
| Heat resistance (creep test) |
120ºC |
